Crushing Equipment
European Version Jaw Crusher
The European Version jaw crusher uses compressive force between a fixed and a swinging jaw plate to break hard, abrasive rock. Its deep symmetrical crushing chamber and optimised nip angle promote high reduction ratios and consistent product sizing.
Technical parameters
It occupies the primary crushing station, receiving run-of-mine feed directly from a dump hopper or grizzly feeder. The crusher discharges a coarse product that feeds a secondary crusher or a grinding circuit, depending on plant design.
Six standard models, designated C80 through C140, scale in feed opening, power, and capacity. The discharge opening adjusts over a set range, allowing the operator to control product top size. Selection turns on the maximum feed lump dimension, throughput target, and crusher setting.
| Model | Power (Kw) | Rotation Speed (r/min) | Feed Opening Width (mm) | Feed Opening Depth (mm) | Max Feed Size (mm) | Discharge Opening Adjustment Range (mm) | Production Capacity (t/h) |
|---|---|---|---|---|---|---|---|
| C80 | 75 | 360 | 800 | 560 | 460 | 40-175 | 65-390 |
| C100 | 110 | 260 | 1000 | 760 | 630 | 70-200 | 165-520 |
| C125 | 160 | 230 | 1250 | 950 | 760 | 100-225 | 325-830 |
| C140 | 200 | 220 | 1400 | 1070 | 850 | 125-250 | 400-1000 |
| C160 | 250 | 220 | 1600 | 1200 | 960 | 150-300 | 495-1295 |
| C200 | 400 | 200 | 2000 | 1500 | 1300 | 175-300 | 950-1900 |
Standard-model catalogue figures. Actual capacity, power draw and wear life shift with ore properties, feed gradation and circuit conditions. Use them to shortlist, then confirm the duty by testwork, flowsheet calculation and a written confirmation from the manufacturer.
What decides the selection
Before a model is fixed, define the largest particle size the crusher will accept, the target product size, and the required tonnes per hour. Confirm the ore's compressive strength, abrasiveness, and moisture content. This data determines which frame size and setting will meet the duty without excessive power draw or premature wear.
- Maximum run-of-mine feed size
- Ore hardness and abrasiveness
- Moisture and clay content
- Target closed-side setting
- Required throughput per hour
- Open-circuit or closed-circuit configuration
- Wear part life and maintenance access
Other crushing machines
- Jaw Crusher16 models
- Gyratory Crusher63 models
- Hammer Crusher20 models
- Impact Crusher9 models
- Roller Crusher12 models
- High-Pressure Grinding Roller (HPGR)13 models
ISO 9001 / ISO 14001 / ISO 45001 / ISO 9712 / CE / CSA W47.1 / CNAS accredited laboratory
Send the duty, get a sized proposal
Tell us the ore, the throughput and the target product. Our process engineers come back with a flowsheet position, a model shortlist and the testwork we would need to confirm it.